Linathene LL405 USI Corporation Polyethylene, Linear Low Density

Product Description

LINATHENE LL405 is a linear low density polyethylene developed for rotation molding. Excellent environmental stress crack resistance, chemical inertness, low temperature impact strength, rigidity, toughness combined with good moldability and make this resin especially suitable for rotation molding. LINATHENE LL405 can be ground into powders then molded into large parts, such as storage tanks for chemicals or water, tool boxes, water drums, etc. LINATHENE LL405 meets the requirement of the U.S. Food and Drug Administration regulation. It can be safely used for food containing applications.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Food Contact Acceptable

Good Moldability

Good Toughness

High ESCR (Stress Crack Resist.)

High Rigidity

Low Density

Low Temperature Impact Resistance

Uses

Non-specific Food Applications

Tanks

Forms

Pellets

Processing Method

Injection Molding

Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield, Compression Molded		psi
Break, Compression Molded		psi
Tensile Elongation (Break, Compression Molded)		%	ASTM D638
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Additional Information
Melting Point, ASTM D2117: 125°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Linathene LL405, Linathene , LinatheneLL405, LL 405, LL405, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, USI Corporation, PolyethyleneLinearLowDensity, 405LL
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Low Density, Low Specific Gravity, High Rigidity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Toughness, Tough, Good Moldability.
Uses
Uses may also be described by the following terms: Food Applications.

Notes

¹Typical properties: these are not to be construed as specifications.

Linathene LL405

Linear Low Density Polyethylene

Supplied by USI Corporation