IDES Prospector Already have an account? Login Here

IDES

Hostacom 5458N

Polypropylene Copolymer

Mineral Filler, 20%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostacom 5458N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Hostacom" TKC 5458N is a 20% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness/impact balance and good flowability properties with good dimensional stability. The grade has been specifically designed for molding of automotive interior trim parts. The grade is available in color-matched, pellet from.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 20% Filler by Weight
Features 
  • Copolymer
  • Good Dimensional Stability
  • Good Flow
  • Good Stiffness
  • Scratch Resistant
Uses 
  • Automotive Interior Trim
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
73°F
ft·lb/in²
  
77°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostacom 5458N, Hostacom , Hostacom5458N, 5458 N, 5458N, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, N5458
Features
Features may also be described by the following terms: Scratch Resistant, Resists Scratches, Good Stiffness, Good Flow, Good Dimensional Stability, Dimensionally Stable.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.