IDES Prospector Already have an account? Login Here

IDES

Topas® 5013X14

Cyclic Olefin Copolymer

Supplied by Topas Advanced Polymers, Inc.

The technical datasheet with complete property values for Topas® 5013X14 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Developmental grade for film extrusion.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Uses 
  • Film
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
    ISO 1133
190°C/2.16 kg
in³/10min
 
230°C/2.16 kg
in³/10min
 
Water Absorption (Saturation, 73°F)
%
ISO 62
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Modulus
    ISO 527-3
MD: 2.8 mil, Cast Film
psi
 
TD: 2.8 mil, Cast Film
psi
 
Tensile Strength
    ISO 527-3
MD: 2.8 mil, Cast Film
psi
 
TD: 2.8 mil, Cast Film
psi
 
Tensile Elongation
    ISO 527-3
MD: Break, 2.8 mil, Cast Film
%
 
TD: Break, 2.8 mil, Cast Film
%
 
Dart Drop Impact (2.8 mil, Cast Film)
g
ISO 7765-1
Elmendorf Tear Strength
    ISO 6383-2
MD: 2.8 mil, Cast Film
lbf
 
TD: 2.8 mil, Cast Film
lbf
 
Oxygen Transmission Rate (73°F, 3.9 mil, Cast Film, 50% RH)
cm³/100 in²/24 hr
ASTM D3985
Water Vapor Transmission Rate (100°F, 3.9 mil, Cast Film, 90% RH)
g/100 in²/24 hr
ISO 15106-3
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature 2
°F
ISO 11357-2
Optical
Nominal Value
Unit
Test Method
Gloss (60°, 2.76 mil, Cast Film)
 
ISO 2813
Haze (2.76 mil, Cast Film)
%
ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Topas® 5013X14, Topas 5013X14, Topas® , Topas, Topas5013X14, 5013 X 14, 5013X14, 5013X, X14, Cyclic Olefin Copolymer, COC, Polyolefin, CyclicOlefinCopolymer, X5013
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Die Temperature
°F
 
Extrusion Notes
Head pressure: P melt > 140 bar / 2000 psi; Fine screen packs as needed
Screw Speed: n screw > 50% nominal
Screw design:
Multi-purpose screw with shear/mixing section
Screw diameter > 60 mm / 2.5 in
L/D ratio 30:1
Compression ratio 2:1
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.