Vision PPC BL1008 AKG Polymers Polypropylene Copolymer

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Additional Information
Melt Flow Index, ISO 1133: 8-12 g/10ming Density, Internal Method: 0.9-0.94 g/cm³ Falling Weight Impact Strength, Internal Method, 23°C: >90 kg-cm Hardness, Internal Method, Shore D: 60-64 Ash Content, Internal Method: <6% Non virgin polymer content, Internal Method: >95% Values listed as Charpy Notched Impact Strength, ISO 179, were tested in accordance with DIN 53453.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vision® PPC BL1008, Vision PPC BL1008, Vision® , Vision, VisionPPCBL1008, PPC BL 1008, PPC BL1008, PPCBL, BL1008, PPCBL1008, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, AKG Polymers, PolypropyleneCopolymer, PPCopolymer, BLPPC
Features
Features may also be described by the following terms: High Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Notes

¹Typical properties: these are not to be construed as specifications.

Vision® PPC BL1008