IDES Prospector Already have an account? Login Here

IDES

TEREZ ASA 8007 black

Acrylonitrile Styrene Acrylate

Supplied by TER HELL PLASTIC GMBH

The technical datasheet with complete property values for TEREZ ASA 8007 black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Extrusion grade with matt surface.

Use:
Suitable for extrusion applications, outdoor and indoor use.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Surface Finish
Uses 
  • Outdoor Applications
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus 3
psi
ASTM D790
Flexural Strength 3
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
0.125 in
ft·lb/in
 
0.250 in
ft·lb/in
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.250 in)
°F
ASTM D648
Vicat Softening Temperature
°F
ISO 306/B50
Additional Information
UV Resistance, ASTM D4459, 300 hr, Ivory color: Delta E
Related Terminology
This supplier and product may also be known by these terms: Terhel

Product names can be difficult to match. You may have searched any one of these terms to find this product: TEREZ ASA 8007 black, TEREZ ASA , TEREZASA8007black, TEREZASA, ASA 8007 black, ASA8007 black, ASA8007, ASA, ASA8007black, 8007 black, 8007black, Acrylonitrile Styrene Acrylate, Ter Hell Plast, AcrylonitrileStyreneAcrylate, black8007, 8007ASA
Features
Features may also be described by the following terms: Good Surface Finish.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.