IDES Prospector Already have an account? Login Here

IDES

TEREZ PMMA 5001

Polymethyl Methacrylate Acrylic

Supplied by TER HELL PLASTIC GMBH

The technical datasheet with complete property values for TEREZ PMMA 5001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Standard grade, good heat deflection temperature.

Application:
Bars and profiles, scratch resistant, optical high quality moulding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Opticals
  • Scratch Resistant
  
Uses 
  • Profiles
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ISO 489
Transmission Coefficient
%
 ISO 13468-1
Related Terminology
This supplier and product may also be known by these terms: Terhel

Product names can be difficult to match. You may have searched any one of these terms to find this product: TEREZ PMMA 5001, TEREZ PMMA , TEREZPMMA5001, TEREZPMMA, PMMA 5001, PMMA5001, PMMA, 5001, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, Ter Hell Plast, AcrylicPolymethylMethacrylate, AcrylicPMMA, 5001PMMA
Features
Features may also be described by the following terms: Scratch Resistant, Resists Scratches.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.