IDES Prospector Already have an account? Login Here

IDES

SAXALAC™ 108GF17

Acrylonitrile Butadiene Styrene

Glass Fiber Reinforcement, 17%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALAC™ 108GF17 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Saxalac 108 GF17 is a 17% glasfibres reinforced ABS injection molding grade, characterized by high impact strength, high stiffness and good resistance to heat distortion.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 17% Filler by Weight
Features 
  • High Impact Resistance
  • High Stiffness
  
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Moisture Content 2
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Ball Pressure Test (208°F, 0.0787 in)
 
 IEC 60335-1
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALAC™ 108GF17, SAXALAC 108GF17, SAXALAC™ , SAXALAC, SAXALAC108GF17, 108 GF 17, 108GF17, 108GF, GF17, Acrylonitrile Butadiene Styrene, ABS, Sax Polymers, AcrylonitrileButadieneStyrene, GF108
Features
Features may also be described by the following terms: High Impact Resistance, High Stiffness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2B130
380x10x4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.