IDES Prospector Already have an account? Login Here

IDES

SAXALAC™ 120T E09

Acrylonitrile Butadiene Styrene

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALAC™ 120T E09 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXALAC 120T E09 is a permanent antistatic, easy flowing ABS injection molding grade, characterized by high impact strength, high stiffness and good resistance to heat distortion.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
Features 
  • Antistatic
  • Good Flow
  • High Impact Resistance
  • High Stiffness
  • Medium Heat Resistance
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Glow Wire Flammability Index
°F
 IEC 60695-2-12
Additional Information
Ball Pressure, IE/CEN 60335-1, 2mm: 93°C
Moisture Content, B130: <0.2%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALAC™ 120T E09, SAXALAC 120T E09, SAXALAC™ , SAXALAC, SAXALAC120TE09, 120 T E 09, 120T E09, 120T, TE, E09, 120TE09, Acrylonitrile Butadiene Styrene, ABS, Sax Polymers, AcrylonitrileButadieneStyrene, T120
Features
Features may also be described by the following terms: High Stiffness, High Impact Resistance, Good Flow, Medium Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.