IDES Prospector Already have an account? Login Here

IDES

SAXALEN™ PPC101CG50

Polypropylene Copolymer

Glass\Calcium Carbonate, 50%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALEN™ PPC101CG50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPC101CG50 is 50% calcium carbonate and glass fiber filled. The use of pp copolymers guarantees a high cold impact strength. The combination of calcium carbonate and glass fibers results in small distortion inclination and highest rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass\Calcium Carbonate, 50% Filler by Weight
Features 
  • Copolymer
  • High Rigidity
  • Low Temperature Impact Resistance
  • Low Warpage
  
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALEN™ PPC101CG50, SAXALEN PPC101CG50, SAXALEN™ , SAXALEN, SAXALENPPC101CG50, PPC 101 CG 50, PPC101CG50, PPC101, 101CG, CG50, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Sax Polymers, PolypropyleneCopolymer, PPCopolymer, 101PPC
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Rigidity, Low Warpage, Low Warp.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.