IDES Prospector Already have an account? Login Here

IDES

SAXALEN™ PPC100T20U

Polypropylene Copolymer

Talc Filler, 20%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALEN™ PPC100T20U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXALEN PPC100T20 is a 20% talcum powder reinforced polypropylene copolymer with high rigidity and small distortion inclination. Additionally this grade is antistatically equipped and contains UV stabilizer.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Additive 
  • Antistatic
  • UV Stabilizer
  
Features 
  • Antistatic
  • Copolymer
  • High Rigidity
  • Low Warpage
  
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180/1U
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALEN™ PPC100T20U, SAXALEN PPC100T20U, SAXALEN™ , SAXALEN, SAXALENPPC100T20U, PPC 100 T 20 U, PPC100T20U, PPC100, 100T, T20, 20U, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Sax Polymers, PolypropyleneCopolymer, PPCopolymer, 100PPC
Features
Features may also be described by the following terms: High Rigidity, Low Warpage, Low Warp.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.