IDES Prospector Already have an account? Login Here

IDES

SAXALEN™ PPH118T30

Polypropylene Homopolymer

Talc Filler, 30%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALEN™ PPH118T30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPH118T30 is a 30% talc reinforced polypropylene homopolymer.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 30% Filler by Weight
Features 
  • Homopolymer
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALEN™ PPH118T30, SAXALEN PPH118T30, SAXALEN™ , SAXALEN, SAXALENPPH118T30, PPH 118 T 30, PPH118T30, PPH118, 118T, T30, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Sax Polymers, PolypropyleneHomopolymer, PPHomopolymer, 118PPH
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.