IDES Prospector Already have an account? Login Here

IDES

SAXALEN™ PPH323B20U

Polypropylene Homopolymer

Glass Bead, 20%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALEN™ PPH323B20U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXALEN PPH323B20U is a 20% glass ball reinforced, UV stabilized polypropylene homopolymer with optimized distortion characteristics and very good fluidity. SAXALEN PPH323B20U is suitable for thinwall injection molding..
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 20% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Good Flow
  • Homopolymer
  
Uses 
  • Thin-walled Parts
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALEN™ PPH323B20U, SAXALEN PPH323B20U, SAXALEN™ , SAXALEN, SAXALENPPH323B20U, PPH 323 B 20 U, PPH323B20U, PPH323, 323B, B20, 20U, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Sax Polymers, PolypropyleneHomopolymer, PPHomopolymer, 323PPH
Features
Features may also be described by the following terms: Good Flow.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
380*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.