IDES Prospector Already have an account? Login Here

IDES

SAXALOY™ C30V7

Polyamide 6 + ABS

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXALOY™ C30V7 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXALOY C30V7 is a high impact resistant mixture of PA6 and ABS, characterized by high toughness, good low temperature impact strength, resistance to heat distortion and a good chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Chemical Resistance
  • High Heat Resistance
  • High Impact Resistance
  • Low Temperature Impact Resistance
  • Ultra High Toughness
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
Moisture Content, B130: <0.2%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXALOY™ C30V7, SAXALOY C30V7, SAXALOY™ , SAXALOY, SAXALOYC30V7, C 30 V 7, C30V7, C30, 30V, V7, Polyamide 6 + ABS, Polyamide 6 ABS, Polyamide 6 : ABS, Polyamide 6 / ABS, Polyamide 6 - ABS, Polyamide 6 _ ABS, Polyamide 6 ABS, Nylon 6+ABS, Nylon 6ABS, Nylon 6:ABS, Nylon 6/ABS, Nylon 6-ABS, Nylon 6_ABS, Nylon 6 ABS, Polyamide, Nylon, Sax Polymers, Polyamide6ABS, Nylon6ABS, Polyamide6_ABS, Nylon6_ABS, 30C
Generic Name
Generic Name may also be described by the following terms: PA6+ABS.
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Ultra High Toughness, High Impact Resistance, High Heat Resistance, Good Chemical Resistance, Chemical Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.