IDES Prospector Already have an account? Login Here

IDES

SAXASAN™ 2118

Styrene Acrylonitrile

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXASAN™ 2118 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXASAN 2118 is a easy flowing, water clear standard SAN grade with balanced mechanical properties.SAXASAN 2118 is characterized by high tensile strength and good resistance to heat distortion. It can be used for injection molding and extrusion applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • High Clarity
  • High Tensile Strength
  • Medium Heat Resistance
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
Moisture Content, B130: <0.2%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXASAN™ 2118, SAXASAN 2118, SAXASAN™ , SAXASAN, SAXASAN2118, 2118, Styrene Acrylonitrile, SAN, Sax Polymers, StyreneAcrylonitrile
Features
Features may also be described by the following terms: High Tensile Strength, High Clarity, Good Flow, Medium Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.