IDES Prospector Already have an account? Login Here

IDES

SAXATEC™ 4910 GF10

Acrylonitrile Styrene Acrylate

Glass Fiber Reinforcement, 10%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXATEC™ 4910 GF10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXATEC 4910 GF10 is a 10% glasfibres reinforced, medium viscosity and weatherable ASA grade, characterized by high mechanical strength and good processability
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Processability
  • Good Weather Resistance
  • High Strength
  • Medium Viscosity
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index
°F
 IEC 60695-2-12
Additional Information
Ball Pressure, IE/CEN 60335-1, 2mm: 95°C
Moisture Content, B130: <0.2%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXATEC™ 4910 GF10, SAXATEC 4910 GF10, SAXATEC™ , SAXATEC, SAXATEC4910GF10, 4910 GF 10, 4910 GF10, 4910GF, GF10, 4910GF10, Acrylonitrile Styrene Acrylate, ASA, Sax Polymers, AcrylonitrileStyreneAcrylate, GF4910
Features
Features may also be described by the following terms: High Strength, Good Weather Resistance, Weather Resistant, Good Processability, Easy Processing, Medium Viscosity.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.