IDES Prospector Already have an account? Login Here

IDES

Borpact™ SG930MO

Polypropylene Random Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borpact™ SG930MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borpact SG930MO is a random heterophasic copolymer intended for injection moulding. This grade yields high transparency and deep freeze impact resistance combined with excellent flow properties. and is designed for highspeed injection moulding and contains nucleating and antistatic/demoulding additives.

In addition, components have good gloss, very low stress whitening and excellent taste and odour properties. Products moulded from this grade have an excellent balance of see-through transparency and deep freeze impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  • North America
  • South America
  
Additive 
  • Antistatic
  • Mold Release
  • Nucleating Agent
Features 
  • Antistatic
  • Fast Molding Cycle
  • Good Flow
  • Good Impact Resistance
  • Good Mold Release
  • High Clarity
  • Low Temperature Impact Resistance
  • Low to No Odor
  • Low to No Taste
  • Medium Gloss
  • Nucleated
  • Random Copolymer
  • Stress Whitening Resistant
Uses 
  • Caps
  • Closures
  • Containers
  • Crates
  • Food Containers
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borpact™ SG930MO, Borpact SG930MO, Borpact™ , Borpact, BorpactSG930MO, SG 930 MO, SG930MO, SG930, 930MO, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Borealis, PolypropyleneRandomCopolymer, PPRandomCopolymer, 930SG
Features
Features may also be described by the following terms: Good Flow, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Low Odor, Low Taste, High Clarity, Good Mold Release, Easy Release, Good Demolding, Medium Gloss, Random Copolymer, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Food Containers, Food Container.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.