IDES Prospector Already have an account? Login Here

IDES

Sattler Plastics SUPREME SH 03

High Impact Polystyrene

Supplied by H. Sattler Plastics Company, Inc.

The technical datasheet with complete property values for Sattler Plastics SUPREME SH 03 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Strength
  • Good Toughness
  • High Flow
  • High Impact Resistance
  
Uses 
  • Compounding
  • Housings
  • Thin-walled Parts
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sattler Plastics SUPREME SH 03, Sattler Plastics , SattlerPlasticsSUPREMESH03, SattlerPlastics, PlasticsSUPREME SH 03, PlasticsSUPREMESH, Plastics, PlasticsSUPREMESH03, SUPREME SH 03, SUPREMESH, SH03, SUPREMESH03, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, PolystyreneHighImpact, PSHIPS, SHSUPREME, SHPlasticsSUPREME
Features
Features may also be described by the following terms: High Impact Resistance, High Flow, High Melt, High MFI, Good Strength, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Housings, Housing, Compounding, Compounds.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.13 in/min
4Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.