IDES Prospector Already have an account? Login Here

IDES

Hifax BR1149AC

Thermoplastic Polyolefin Elastomer

Mineral Filler

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hifax BR1149AC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hifax BR1149AC very high melt flow, 2,400 MPa flexural modulus, precolored, mineral-filled, low CLTE thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties. It was designed primarily for body side moldings that require good dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler
Features 
  • Good Dimensional Stability
  • Good Impact Resistance
  • Good Moldability
  • High Flow
  • High Stiffness
  • Paintable
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Appearance 
  • Unspecified Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE - Flow (-22 to 212°F)
in/in/°F
 ASTM E228, ISO 11359-2
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hifax BR1149AC, Hifax , HifaxBR1149AC, BR 1149 AC, BR1149AC, BR1149, 1149AC, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, LyondellBasell, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer, 1149BR
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Good Dimensional Stability, Dimensionally Stable, Good Impact Resistance, Good Moldability, High Stiffness.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.