IDES Prospector Already have an account? Login Here

IDES

Hifax CA 1110 A2

Polypropylene Copolymer

Mineral Filler, 10%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hifax CA 1110 A2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Hifax" CA 1110 A2 is a high melt flow, 10% mineral filled, non UV stabilised high impact polypropylene copolymer for painted applications. The grade has been specifically designed for moulding large complex parts that require high impact strength as well as good stiffness. This product has very good aesthetics and is designed for outdoor application. This grade is available in black, pellet form.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Mineral Filler, 10% Filler by Weight
Features 
  • Copolymer
  • Good Stiffness
  • High Flow
  • High Impact Resistance
  • Non-Toxic
  • Paintable
  • Pleasing Surface Appearance
Uses 
  • Automotive Applications
  • Automotive Bumper
  • Outdoor Applications
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hifax CA 1110 A2, Hifax , HifaxCA1110A2, CA 1110 A 2, CA 1110 A2, CA1110, 1110A, A2, CA1110A2, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, 1110CA
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Impact Resistance, Good Stiffness, Non-Toxic, Non Toxic, Toxicity None, Pleasing Surface Appearance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Automotive Bumper, Automotive Bumpers.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.