SABIC PPcompound 7716 SABIC Polypropylene, Unspecified (Mineral Filler)

Product Description

SABIC® PPcompound 7716 is a mineral filled modified polypropylene. This material combines high scratch resistance with a high stiffness, medium impact and good flow. This material has a broad processing window combined with good esthical performance and excellent UV exterior stabilization. Typical applications include esthetical automotive exterior trim such as lateral trims, window trims

SABIC® PPcompound 7716 is a designated automotive grade.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Mineral Filler

Additive

Impact Modifier

UV Stabilizer

Features

Good Flow

Good Processability

Good Surface Finish

Good UV Resistance

High Scratch Resistance

High Stiffness

Impact Modified

Medium Impact Resistance

Uses

Automotive Applications

Automotive Exterior Parts

Automotive Exterior Trim

Automotive Specifications

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage (24 hr)		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2/50
Yield, 0.126 in, Injection Molded		psi
Break, 0.126 in, Injection Molded		psi
Tensile Strain (Break, 0.126 in, Injection Molded)		%	ISO 527-2/50
Flexural Modulus² (Injection Molded)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength			ISO 180/4A
-4°F, Injection Molded		ft·lb/in²
32°F, Injection Molded		ft·lb/in²
73°F, Injection Molded		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Injection Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Vicat Softening Temperature		°F	ISO 306/A
CLTE - Flow			ASTM D696
-22 to 86°F		in/in/°F
73 to 176°F		in/in/°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 7716, SABIC PPcompound 7716, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound7716, SABICPPcompound, PPcompound 7716, PPcompound7716, PPcompound, 7716, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 7716PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Flow, Medium Impact Resistance, High Scratch Resistance, High Stiffness, Good Surface Finish.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1), PSA Peugeot-Citroën (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Method I (3 point load)

SABIC® PPcompound 7716

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)