BESTNYL SI00VI01BN-1 Triesa Polyamide 6

Product Description

Polyamide 6 Standard, lubrified and fast cycle to achieve a faster injection and pieces moulding. Regularly used in small injection pieces and various cavities that requires a fast injection cycle.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Lubricant

Nucleating Agent

Features

Fast Molding Cycle

Lubricated

Nucleated

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)		--	g/10 min	ISO 1133
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)	--		%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)				ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Vicat Softening Temperature		--	°F	ISO 306
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SI00VI01BN-1, BESTNYL SI00VI01BN1, BESTNYL , BESTNYLSI00VI01BN1, SI 00 VI 01 BN, SI00VI01BN, SI 00 VI 01 BN 1, SI00VI01BN-1, SI00VI01BN1, SI00VI01BN:1, SI00VI01BN/1, SI00VI01BN+1, SI00VI01BN_1, SI00VI01BN 1, SI00, 00VI, VI01, 01BN, BN1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Triesa, Polyamide6, Nylon6, 00SI
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SI00VI01BN-1, BESTNYL SI00VI01BN1, BESTNYL , BESTNYLSI00VI01BN1, SI 00 VI 01 BN, SI00VI01BN, SI 00 VI 01 BN 1, SI00VI01BN-1, SI00VI01BN1, SI00VI01BN:1, SI00VI01BN/1, SI00VI01BN+1, SI00VI01BN_1, SI00VI01BN 1, SI00, 00VI, VI01, 01BN, BN1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Triesa, Polyamide6, Nylon6, 00SI

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SI00VI01BN-1

Polyamide 6

Supplied by Triesa Plastics