BESTNYL SI00VI01BN Triesa Polyamide 6

Product Description

Polyamide 6 natural Standard, lubrified to achieve improvements in injection process and moulding. Is an appropriate polyamide for any injection technique and general applications.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Lubricant

Features

General Purpose

Lubricated

Uses

General Purpose

Appearance

Natural Color

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)	--		%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)				ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Vicat Softening Temperature		--	°F	ISO 306
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SI00VI01BN, BESTNYL , BESTNYLSI00VI01BN, SI 00 VI 01 BN, SI00VI01BN, SI00, 00VI, VI01, 01BN, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Triesa, Polyamide6, Nylon6, 00SI
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SI00VI01BN, BESTNYL , BESTNYLSI00VI01BN, SI 00 VI 01 BN, SI00VI01BN, SI00, 00VI, VI01, 01BN, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Triesa, Polyamide6, Nylon6, 00SI Generic Name may also be described by the following terms: PA6.

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SI00VI01BN

Polyamide 6

Supplied by Triesa Plastics