BESTNYL SE25VI02A Triesa Polyamide 66 (Glass Fiber Reinforcement, 25%)

Product Description
Polyamide 6,6 black lubrified with 25% glass fibre reinforcement, for pieces that require good technical and mechanical properties, applied to any injection piece.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 25% Filler by Weight
Additive	Lubricant
Features	Lubricated
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		--	°F	ISO 75-2/B
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min Ashes, Triesa Test: 25% Tracking Index (C.T.I), IEC 112: 450 kV/mm
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE25VI02A, BESTNYL , BESTNYLSE25VI02A, SE 25 VI 02 A, SE25VI02A, SE25, 25VI, VI02, 02A, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 25SE
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE25VI02A, BESTNYL , BESTNYLSE25VI02A, SE 25 VI 02 A, SE25VI02A, SE25, 25VI, VI02, 02A, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 25SE Generic Name may also be described by the following terms: PA66.

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SE25VI02A

Polyamide 66

Glass Fiber Reinforcement, 25%

Supplied by Triesa Plastics