BESTNYL SE30VI02AS08 Triesa Polyamide 66 (Glass Fiber Reinforcement, 30%)

Product Description
Polyamide 6.6 black lubrified with 30% glass fibre reinforcement and friction treated, shows good mechanical properties, it makes it ideal for injection pieces with a final application that involves any kind of mechanical effort and / or mobile pieces under any kind of friction.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 30% Filler by Weight
Additive	Lubricant
Features	Lubricated
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		--	°F	ISO 75-2/B
Vicat Softening Temperature		--	°F	ISO 306
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohm	IEC 60093
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min Ashes, Triesa Test: 30%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE30VI02AS08, BESTNYL , BESTNYLSE30VI02AS08, SE 30 VI 02 AS 08, SE30VI02AS08, SE30, 30VI, VI02, 02AS, AS08, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 30SE
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE30VI02AS08, BESTNYL , BESTNYLSE30VI02AS08, SE 30 VI 02 AS 08, SE30VI02AS08, SE30, 30VI, VI02, 02AS, AS08, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 30SE Generic Name may also be described by the following terms: PA66.

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SE30VI02AS08

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Triesa Plastics