BESTNYL ABP70U/02 Triesa Polyamide 6 + ABS

Product Description
Polyamide and ABS black (PA/ABS) with stabilized UV, is a PA/ABS specifically used for any pieces that requires a protection against ultra violet rays, is recommended for external pieces or in contact with external atmospheric agents.
General
Material Status	Commercial: Active
Availability	Europe
Additive	UV Stabilizer
Features	Good UV Resistance
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)				ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Vicat Softening Temperature		--	°F	ISO 306
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Electric Strength		--	V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL ABP70U/02, BESTNYL ABP70U02, BESTNYL , BESTNYLABP70U02, ABP 70 U, ABP70U, ABP 70 U 02, ABP70U/02, ABP70U02, ABP70U:02, ABP70U+02, ABP70U-02, ABP70U_02, ABP70U 02, ABP70, 70U, U02, Polyamide 6 + ABS, Polyamide 6 ABS, Polyamide 6 : ABS, Polyamide 6 / ABS, Polyamide 6 - ABS, Polyamide 6 _ ABS, Polyamide 6 ABS, Nylon 6+ABS, Nylon 6ABS, Nylon 6:ABS, Nylon 6/ABS, Nylon 6-ABS, Nylon 6_ABS, Nylon 6 ABS, Polyamide, Nylon, Triesa, Polyamide6ABS, Nylon6ABS, Polyamide6_ABS, Nylon6_ABS, 70ABP
Generic Name
Dry	Generic Name may also be described by the following terms: PA6+ABS.
Conditioned	Generic Name may also be described by the following terms: PA6+ABS.
Features
Dry	Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL ABP70U/02, BESTNYL ABP70U02, BESTNYL , BESTNYLABP70U02, ABP 70 U, ABP70U, ABP 70 U 02, ABP70U/02, ABP70U02, ABP70U:02, ABP70U+02, ABP70U-02, ABP70U_02, ABP70U 02, ABP70, 70U, U02, Polyamide 6 + ABS, Polyamide 6 ABS, Polyamide 6 : ABS, Polyamide 6 / ABS, Polyamide 6 - ABS, Polyamide 6 _ ABS, Polyamide 6 ABS, Nylon 6+ABS, Nylon 6ABS, Nylon 6:ABS, Nylon 6/ABS, Nylon 6-ABS, Nylon 6_ABS, Nylon 6 ABS, Polyamide, Nylon, Triesa, Polyamide6ABS, Nylon6ABS, Polyamide6_ABS, Nylon6_ABS, 70ABP

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL ABP70U/02

Polyamide 6 + ABS

Supplied by Triesa Plastics