IDES Prospector Already have an account? Login Here

IDES

BESTNYL PPA60E

Polyamide + PP

Supplied by Triesa Plastics

The technical datasheet with complete property values for BESTNYL PPA60E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide and polypropylene (PA/PP) standard lubricated to achieve improvements in injection process and moulding. Is an appropriate PA/PP for any injection technique and general applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Lubricant
Features 
  • General Purpose
  • Lubricated
  
Uses 
  • General Purpose
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Water Absorption (73°F, 24 hr)
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
--
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D)
--
 
 ISO 868
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
--
°F
 ISO 75-2/B
Vicat Softening Temperature
--
°F
 ISO 306
Electrical
Dry
Conditioned
Unit
Test Method
Electric Strength
--
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
--
 
 UL 94
Additional Information
Dry
Humidity Pellets, ISO 1110: 0.2%
Flammability Speed, FMV 302:<100 mm/min
Tracking Index (C.T.I), IEC 112: 600 kV/mm
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL PPA60E, BESTNYL , BESTNYLPPA60E, PPA 60 E, PPA60E, PPA60, 60E, Polyamide + PP, Polyamide PP, Polyamide : PP, Polyamide / PP, Polyamide - PP, Polyamide _ PP, Polyamide PP, Nylon+PP, NylonPP, Nylon:PP, Nylon/PP, Nylon-PP, Nylon_PP, Nylon PP, Polyamide, Nylon, Triesa, PolyamidePP, Polyamide_PP, 60PPA
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL PPA60E, BESTNYL , BESTNYLPPA60E, PPA 60 E, PPA60E, PPA60, 60E, Polyamide + PP, Polyamide PP, Polyamide : PP, Polyamide / PP, Polyamide - PP, Polyamide _ PP, Polyamide PP, Nylon+PP, NylonPP, Nylon:PP, Nylon/PP, Nylon-PP, Nylon_PP, Nylon PP, Polyamide, Nylon, Triesa, PolyamidePP, Polyamide_PP, 60PPA
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.