BESTNYL SC00VI02AH15 Triesa Polyamide 66/6 Copolymer (Mineral Filler, 30%)

Product Description

Polyamide 6 polyamide 6.6 (PA 6/6.6) black and heat stabilized with 30% mineral charge, is characterized for its great dimensional stability, good superficial finish, good in machine and release mould behaviour. Currently used in injection pieces that are not required to endure mechanical efforts,but with a great deal of importance in final appearance and dimensionality.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Mineral Filler, 30% Filler by Weight

Additive

Heat Stabilizer

Mold Release

Features

Good Dimensional Stability

Good Mold Release

Good Surface Finish

Heat Stabilized

Machinable

Pleasing Surface Appearance

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage		--	%	ISO 294-4
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)				ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		--	°F	ISO 75-2/B
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min Ashes, Triesa Test: 30%
Conditioned	Tracking Index (C.T.I), IEC 112: 525 kV/mm
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SC00VI02AH15, BESTNYL , BESTNYLSC00VI02AH15, SC 00 VI 02 AH 15, SC00VI02AH15, SC00, 00VI, VI02, 02AH, AH15, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Triesa, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 00SC
Generic Name
Dry	Generic Name may also be described by the following terms: PA666, PA66/6.
Conditioned	Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Dry	Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Mold Release, Easy Release, Good Demolding, Good Surface Finish, Pleasing Surface Appearance.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SC00VI02AH15, BESTNYL , BESTNYLSC00VI02AH15, SC 00 VI 02 AH 15, SC00VI02AH15, SC00, 00VI, VI02, 02AH, AH15, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Triesa, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 00SC

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SC00VI02AH15

Polyamide 66/6 Copolymer

Mineral Filler, 30%

Supplied by Triesa Plastics