BESTNYL SC30VI02BMU Triesa Polyamide 66/6 Copolymer (Glass Fiber Reinforcement, 30%)

Product Description

Polyamide 6 Polyamide 6,6(PA 6/6.6)black lubrified, UV stabilized and Impact improved with 30% glass fibre reinforcement, has good mechanical properties and high impact resistance combined with UV stabilization, in intended to be used in final pieces stable to the light (UV) and required to have impact and mechanical efforts endurance.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Lubricant

UV Stabilizer

Features

Good Impact Resistance

Good UV Resistance

Lubricated

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Yield)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Hardness	Dry	Conditioned	Unit	Test Method
Shore Hardness (Shore D)		--		ISO 868
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Vicat Softening Temperature		--	°F	ISO 306
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Additional Information
Dry	Humidity Pellets, ISO 1110: 0.2% Flammability Speed, FMV 302:<100 mm/min Ashes, Triesa Test: 30%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SC30VI02BMU, BESTNYL , BESTNYLSC30VI02BMU, SC 30 VI 02 BMU, SC30VI02BMU, SC30, 30VI, VI02, 02BMU, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Triesa, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 30SC
Generic Name
Dry	Generic Name may also be described by the following terms: PA666, PA66/6.
Conditioned	Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Dry	Features may also be described by the following terms: Good Impact Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SC30VI02BMU, BESTNYL , BESTNYLSC30VI02BMU, SC 30 VI 02 BMU, SC30VI02BMU, SC30, 30VI, VI02, 02BMU, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Triesa, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 30SC

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

BESTNYL SC30VI02BMU

Polyamide 66/6 Copolymer

Glass Fiber Reinforcement, 30%

Supplied by Triesa Plastics