IDES Prospector Already have an account? Login Here

IDES

BESTNYL SE00VI01AHQ03

Polyamide 66

Nano Filler, 5.0%

Supplied by Triesa Plastics

The technical datasheet with complete property values for BESTNYL SE00VI01AHQ03 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Poliamida 6,6 natural with heat stabilized and 5%nano charges wich create a barrier against external atmospherical agents and also improves dimensional, enlighten the final application with the same caracteristics of PA 6.6 30% C.M. furthermore produces better final surface.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Nano Filler, 5.0% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Dimensional Stability
  • Good Surface Finish
  • Heat Stabilized
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Humidity Pellets, ISO 1110: 0.2%
Flammability Speed, FMV 302:<100 mm/min
Ashes, Triesa Test: 6%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE00VI01AHQ03, BESTNYL , BESTNYLSE00VI01AHQ03, SE 00 VI 01 AHQ 03, SE00VI01AHQ03, SE00, 00VI, VI01, 01AHQ, AHQ03, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 00SE
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Surface Finish.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.