IDES Prospector Already have an account? Login Here

IDES

BESTNYL SE30VI11AHD

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Triesa Plastics

The technical datasheet with complete property values for BESTNYL SE30VI11AHD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide 6.6 special black with 30% glass fibre reinforcement, heat stabilized and certified to use in food contact. Generally used for pieces with very good mechanical properties in conjunction with good injection behaviour, for general industry that requieres food contact certification.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Processability
  • Heat Stabilized
  
Uses 
  • General Purpose
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage
--
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D)
--
 
 ISO 868
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
--
°F
 ISO 75-2/B
Vicat Softening Temperature
--
°F
 ISO 306
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Electric Strength
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
--
 
 UL 94
Additional Information
Dry
Humidity Pellets, ISO 1110: 0.2%
Flammability Speed, FMV 302:<100 mm/min
Ashes, Triesa Test: 30%
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE30VI11AHD, BESTNYL , BESTNYLSE30VI11AHD, SE 30 VI 11 AHD, SE30VI11AHD, SE30, 30VI, VI11, 11AHD, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 30SE
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Processability, Easy Processing.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTNYL SE30VI11AHD, BESTNYL , BESTNYLSE30VI11AHD, SE 30 VI 11 AHD, SE30VI11AHD, SE30, 30VI, VI11, 11AHD, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Triesa, Polyamide66, Nylon66, 30SE
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.