IDES Prospector Already have an account? Login Here

IDES

BESTDUR PXG7

Polyethylene Terephthalate

Glass Fiber Reinforcement, 35%

Supplied by Triesa Plastics

The technical datasheet with complete property values for BESTDUR PXG7 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PET natural lubrified with 35% glass fibre reinforcement and V-0 quality, is a material with good mechanical and flame retardant properties, high resistance and rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Additive 
  • Lubricant
Features 
  • Flame Retardant
  • High Impact Resistance
  • High Rigidity
  • Lubricated
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Humidity Pellets, ISO 1110: 0.2%
Flammability Speed, FMV 302:<100 mm/min
Ashes, Triesa Test: 35%
Glow Wire, IEC 695: OK
Tracking Index (C.T.I), IEC 112: 210 kV/mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BESTDUR PXG7, BESTDUR , BESTDURPXG7, PXG 7, PXG7, Polyethylene Terephthalate, PET, Polyester, Triesa, PolyethyleneTerephthalate, 7PXG
Features
Features may also be described by the following terms: High Impact Resistance, High Rigidity.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.