Juner PBT-301-G20C Zhejiang Juner Polybutylene Terephthalate

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
Ash Content, BG/9345: 20% Chromatism, Delta E: 1 Granule Size: 3 mm diameter x 3 to 5 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Juner PBT-301-G20C, Juner PBT301G20C, Juner , JunerPBT301G20C, PBT, PBT 301 G 20 C, PBT-301-G20C, PBT301G20C, PBT:301:G20C, PBT/301/G20C, PBT+301+G20C, PBT_301_G20C, PBT 301 G20C, PBT301, 301G, G20, 20C, Polybutylene Terephthalate, Polyester, Zhejiang Juner, PolybutyleneTerephthalate, 301PBT
Features
Features may also be described by the following terms: Medium Gloss.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Notes
The drying conditions above are for a horizontal oven dryer. Injection Speed: 35 to 90% Vacuum Drying Temperature, -0.08 MPa: 120°C Vacuum Drying Time, -0.08 MPa: 3hr Chute Air Drying Temperature: 130°C Chute Air Drying Time, -0.08 MPa: 5hr

Juner PBT-301-G20C