Juner PA66-301-GM40 Zhejiang Juner Polyamide 66 (Glass\Mineral, 40%)

General
Material Status	Commercial: Active
Availability	Asia Pacific
Filler / Reinforcement	Glass\Mineral, 40% Filler by Weight
Additive	Flame Retardant
Features	Flame Retardant
Uses	Appliances
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption (73°F, 24 hr)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
Ash Content, BG/9345: 40% Chromatism, Delta E: 0.8 Granule Size: 3 mm diameter x 3 to 5 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Juner PA66-301-GM40, Juner PA66301GM40, Juner , JunerPA66301GM40, PA 66, PA 66 301 GM 40, PA66-301-GM40, PA66301GM40, PA66:301:GM40, PA66/301/GM40, PA66+301+GM40, PA66_301_GM40, PA66 301 GM40, PA66, 66301, 301GM, GM40, Polyamide 66, Nylon 66, Polyamide, Nylon, Zhejiang Juner, Polyamide66, Nylon66, 66PA
Generic Name
Generic Name may also be described by the following terms: PA66.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Notes
The drying conditions above are for a horizontal oven dryer. Injection Speed: 35 to 80% Vacuum Drying Temperature, -0.08 MPa: 110°C Vacuum Drying Time, -0.08 MPa: 2hr Chute Air Drying Temperature: 120°C Chute Air Drying Time, -0.08 MPa: 5hr

Juner PA66-301-GM40