Juner PA66/ABS-G15 Zhejiang Juner Polyamide 66 + ABS (Glass Fiber Reinforcement, 15%)

General
Material Status	Commercial: Active
Availability	Asia Pacific
Filler / Reinforcement	Glass Fiber Reinforcement, 15% Filler by Weight
Features	Medium Gloss
Uses	Power/Other Tools
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Additional Information
Ash Content, BG/9345: 15% Chromatism, Delta E: 1 Granule Size: 4 mm diameter x 3 to 5 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Juner PA66/ABS-G15, Juner PA66ABSG15, Juner , JunerPA66ABSG15, PA 66, PA 66 ABS G 15, PA66/ABS-G15, PA66ABSG15, PA66:ABS-G15, PA66+ABS-G15, PA66-ABS-G15, PA66_ABS-G15, PA66 ABS-G15, PA66/ABS:G15, PA66/ABS/G15, PA66/ABS+G15, PA66/ABS_G15, PA66/ABS G15, PA66, 66ABS, ABSG, G15, PA66_ABSG15, PA66 ABSG15, PA66ABS_G15, PA66ABS G15, Polyamide 66 + ABS, Polyamide 66 ABS, Polyamide 66 : ABS, Polyamide 66 / ABS, Polyamide 66 - ABS, Polyamide 66 _ ABS, Polyamide 66 ABS, Nylon 66+ABS, Nylon 66ABS, Nylon 66:ABS, Nylon 66/ABS, Nylon 66-ABS, Nylon 66_ABS, Nylon 66 ABS, Polyamide, Nylon, Zhejiang Juner, Polyamide66ABS, Nylon66ABS, Polyamide66_ABS, Nylon66_ABS, 66PA
Generic Name
Generic Name may also be described by the following terms: PA66+ABS.
Features
Features may also be described by the following terms: Medium Gloss.
Uses
Uses may also be described by the following terms: Power Tools, Tools.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Notes
The drying conditions above are for a horizontal oven dryer. Injection Speed: 35 to 80% Vacuum Drying Temperature, -0.08 MPa: 110°C Vacuum Drying Time, -0.08 MPa: 2hr Chute Air Drying Temperature: 120°C Chute Air Drying Time, -0.08 MPa: 5hr

Notes

¹Typical properties: these are not to be construed as specifications.

Juner PA66/ABS-G15

Polyamide 66 + ABS

Glass Fiber Reinforcement, 15%

Supplied by Zhejiang Juner Materials Co., Ltd.