IDES Prospector Already have an account? Login Here

IDES

Ultramid® 1503-2 BK ND3007

Polyamide 66

Glass Fiber Reinforcement, 33%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® 1503-2 BK ND3007 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid 1503-2 BK ND3007 is a 33% glass reinforced, heat stabilized, pigmented black injection molding PA6/6.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 33% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Dimensional Stability
  • Heat Stabilized
  
RoHS Compliance 
Automotive Specifications 
 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
 ISO 1183 2
Water Absorption
       ISO 62 2
Saturation
--
%
  
Equilibrium
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
--
psi
 ISO 527-2 2
Tensile Stress (Break)
psi
 ISO 527-2 2
Tensile Strain (Break)
--
%
 ISO 527-2 2
Flexural Modulus
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
       ISO 179/1eA 2
-22°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Notched Izod Impact Strength (73°F)
--
ft·lb/in²
 ISO 180
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       ISO 75-2 2
66 psi
--
°F
  
264 psi
--
°F
  
Melting Temperature (DSC)
--
°F
 ISO 3146
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 1503-2 BK ND3007, Ultramid 15032 BK ND3007, Ultramid® , Ultramid, Ultramid15032BKND3007, 1503, 1503 2 BK ND 3007, 1503-2 BK ND3007, 15032 BK ND3007, 1503:2 BK ND3007, 1503/2 BK ND3007, 1503+2 BK ND3007, 1503_2 BK ND3007, 1503 2 BK ND3007, 15032, 2BK, BKND, ND3007, 15032BKND3007, 1503_2BKND3007, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, BASF, Polyamide66, Nylon66, 21503
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Dimensional Stability, Dimensionally Stable.
Automotive Specifications
Dry
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (2).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 1503-2 BK ND3007, Ultramid 15032 BK ND3007, Ultramid® , Ultramid, Ultramid15032BKND3007, 1503, 1503 2 BK ND 3007, 1503-2 BK ND3007, 15032 BK ND3007, 1503:2 BK ND3007, 1503/2 BK ND3007, 1503+2 BK ND3007, 1503_2 BK ND3007, 1503 2 BK ND3007, 15032, 2BK, BKND, ND3007, 15032BKND3007, 1503_2BKND3007, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, BASF, Polyamide66, Nylon66, 21503
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.