IDES Prospector Already have an account? Login Here

IDES

Ultramid® B 3EG3 BK00564

Polyamide 6

Glass Fiber Reinforcement, 15%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® B 3EG3 BK00564 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid B3EG3 BK00564 is a 15% glass fiber reinforced, pigmented black injection molding PA6 grade for housings with enhanced impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • Good Thermal Aging Resistance
  • Heat Stabilized
  • Low Viscosity
  • Oil Resistant
  • Semi Crystalline
Uses 
  • Automotive Applications
  • Wheels
  
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Break)
psi
 ISO 527-2 2
Tensile Strain (Break)
%
 ISO 527-2 2
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (73°F)
ft·lb/in²
 ISO 179/1eA 2
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (1 MHz)
 
 IEC 60250
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3EG3 BK00564, Ultramid B 3EG3 BK00564, Ultramid® B , Ultramid B, UltramidB3EG3BK00564, UltramidB, B 3 EG 3 BK 00564, B3EG3 BK00564, B3, 3 EG 3 BK 00564, B3EG3BK00564, 3EG3 BK00564, 3EG, EG3, 3BK, BK00564, 3EG3BK00564, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, 3B
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Impact Resistance, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Semi-Crystalline, Good Dimensional Stability, Dimensionally Stable, Good Flow, Good Processability, Easy Processing, Good Stiffness, Good Thermal Aging Resistance, Thermal Aging Resistant, Low Viscosity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.