IDES Prospector Already have an account? Login Here

IDES

Xarec® N WA5030-02

Syndiotactic Polystyrene

Glass Fiber Reinforcement, 30%

Supplied by Idemitsu Chemicals

The technical datasheet with complete property values for Xarec® N WA5030-02 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High Heat Crystalline Polymer Blends - 30% Glass Filled Polymer for Automotive and Industrial Applications
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Crystalline
  • High Heat Resistance
  
Uses 
  • Automotive Applications
  • Industrial Applications
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/B
Molding Shrinkage
     Internal Method
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Water Absorption 2 (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
     TMA
Flow: -22 to 86°F
in/in/°F
  
Transverse: -22 to 86°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
 
 IEC 60250
Dissipation Factor
 
 IEC 60250
Arc Resistance (PLC)
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI) (PLC) 3
 
 IEC 60112
Hot-wire Ignition (HWI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
High Amp Arc Ignition (HAI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xarec® N WA5030-02, Xarec N WA503002, Xarec® , Xarec, XarecNWA503002, N WA 5030, N WA5030, N WA 5030 02, NWA5030, N WA5030-02, N WA503002, N WA5030:02, N WA5030/02, N WA5030+02, N WA5030_02, N WA5030 02, NWA, WA5030, 503002, NWA503002, NWA5030_02, Syndiotactic Polystyrene, SPS, Polystyrene, PS, Idemitsu, SyndiotacticPolystyrene, WAN
Features
Features may also be described by the following terms: High Heat Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
224 hrs
3Solution A
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.