IDES Prospector Already have an account? Login Here

IDES

IPCC PP PI0800

Polypropylene Homopolymer

Supplied by Iran Petrochemical Commercial Company (IPCC)

The technical datasheet with complete property values for IPCC PP PI0800 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PI0800 is a homopolymer injection molding grade. It is a linear, stereo regular and high crystalline polymer that imparts useful strength and toughness.

The principal characteristics of homopolypropylene injection molding are relatively high stiffness, low specific gravity, high tensile strength , good clarity, good stress crack resistance and relatively high temperature resistance. This grade contains antioxidant to protect the polymer from degradation during processing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Crystalline
  • Food Contact Acceptable
  • Good Strength
  • Good Toughness
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
  • High Stiffness
  • High Tensile Strength
  • Homopolymer
  • Medium Clarity
  • Recyclable Material
Uses 
  • Automotive Applications
  • Household Goods
  • Kitchenware
  • Medical/Healthcare Applications
  • Sheet
  • Stationary Supplies
  • Toys
Agency Ratings 
Forms 
  • Powder
Processing Method 
  • Extrusion
  • Injection Molding
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Volatile matter, ASTM D1960: 0.05 wt%
Isotactic Index of Powder: 96%
Charpy Impact Strength, ASTM D256: 2.25 kg-cm/cm²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IPCC PP PI0800, IPCC PP , IPCCPPPI0800, IPCCPP, PPPI 0800, PPPI0800, PP, PI 0800, PI0800, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, IPCC, PolypropyleneHomopolymer, PPHomopolymer, 0800PI, 0800PPPI
Features
Features may also be described by the following terms: Good Strength, Good Toughness, Tough, High Stiffness, High Tensile Strength, Medium Clarity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Heat Resistance.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Medical Applications, Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.