IDES Prospector Already have an account? Login Here

IDES

IPCC ABS SD-0150

Acrylonitrile Butadiene Styrene

Supplied by Iran Petrochemical Commercial Company (IPCC)

The technical datasheet with complete property values for IPCC ABS SD-0150 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
General Purpose ABS , SD-0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high injection molding grade with considerable impact strength and medium heat deflection.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Uses 
  • Appliance Components
  • Automotive Applications
  • Connectors
  • Electrical/Electronic Applications
  • Telecommunications
Forms 
  • Granules
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F)
%
 ASTM D638
Flexural Modulus 3 (73°F)
psi
 ASTM D790
Flexural Strength 3 (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IPCC ABS SD-0150, IPCC ABS SD0150, IPCC ABS , IPCCABSSD0150, IPCCABS, SD, ABSSD-0150, ABSSD0150, ABSSD:0150, ABSSD/0150, ABSSD+0150, ABSSD_0150, ABSSD 0150, ABSSD, SD-0150, SD0150, SD:0150, SD/0150, SD+0150, SD_0150, SD 0150, Acrylonitrile Butadiene Styrene, ABS, IPCC, AcrylonitrileButadieneStyrene, 0150SD, 0150ABSSD
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
4Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.