IDES Prospector Already have an account? Login Here

IDES

Fiberfil® J-60/10/CC/30/E NATL

Polypropylene Homopolymer

Calcium Carbonate Filler, 30%; Glass Fiber Reinforcement, 10%

Supplied by Fiberfil® Engineered Plastics Inc.

The technical datasheet with complete property values for Fiberfil® J-60/10/CC/30/E NATL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Calcium Carbonate Filler, 30% Filler by Weight
  • Glass Fiber Reinforcement, 10% Filler by Weight
  
Features 
  • Chemically Coupled
  • Homopolymer
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® J-60/10/CC/30/E NATL, Fiberfil J6010CC30E NATL, Fiberfil® , Fiberfil, FiberfilJ6010CC30ENATL, J 60 10 CC 30 E NATL, J-60/10/CC/30/E NATL, J6010CC30E NATL, J-60:10:CC:30:E NATL, J-60+10+CC+30+E NATL, J-60-10-CC-30-E NATL, J-60_10_CC_30_E NATL, J-60 10 CC 30 E NATL, J:60/10/CC/30/E NATL, J/60/10/CC/30/E NATL, J+60/10/CC/30/E NATL, J_60/10/CC/30/E NATL, J 60/10/CC/30/E NATL, J60, 6010, 10CC, CC30, 30E, ENATL, J6010CC30ENATL, J60_10_CC_30_E NATL, J60 10 CC 30 E NATL, J_6010CC30E NATL, J 6010CC30E NATL, J60_10_CC_30_ENATL, J_6010CC30ENATL, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 60J
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Injection Notes
Screw speed: Medium
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.