Fiberfil J-60/20/E8/M Fiberfil Polypropylene Homopolymer (Glass Fiber Reinforcement, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow			ASTM D955
0.125 in		in/in
0.250 in		in/in
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® J-60/20/E8/M, Fiberfil J6020E8M, Fiberfil® , Fiberfil, FiberfilJ6020E8M, J 60 20 E 8 M, J-60/20/E8/M, J6020E8M, J-60:20:E8:M, J-60+20+E8+M, J-60-20-E8-M, J-60_20_E8_M, J-60 20 E8 M, J:60/20/E8/M, J/60/20/E8/M, J+60/20/E8/M, J_60/20/E8/M, J 60/20/E8/M, J60, 6020, 20E, E8, 8M, J60_20_E8_M, J60 20 E8 M, J_6020E8M, J 6020E8M, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 60J

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® J-60/20/E8/M