IDES Prospector Already have an account? Login Here

IDES

Fiberfil® J-60/40/E/EX

Polypropylene Homopolymer

Glass Fiber Reinforcement, 40%

Supplied by Fiberfil® Engineered Plastics Inc.

The technical datasheet with complete property values for Fiberfil® J-60/40/E/EX is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Chemically Coupled
  • High Viscosity
  • Homopolymer
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
     ASTM D955
0.125 in
in/in
  
0.250 in
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ASTM D638
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Yield, 73°F)
%
 ASTM D638
Flexural Modulus - Tangent (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Rockwell Hardness, ASTM D785, R-Scale: 100 to 110
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® J-60/40/E/EX, Fiberfil J6040EEX, Fiberfil® , Fiberfil, FiberfilJ6040EEX, J 60 40 E EX, J-60/40/E/EX, J6040EEX, J-60:40:E:EX, J-60+40+E+EX, J-60-40-E-EX, J-60_40_E_EX, J-60 40 E EX, J:60/40/E/EX, J/60/40/E/EX, J+60/40/E/EX, J_60/40/E/EX, J 60/40/E/EX, J60, 6040, 40E, EEX, J60_40_E_EX, J60 40 E EX, J_6040EEX, J 6040EEX, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 60J
Features
Features may also be described by the following terms: High Viscosity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.