Fiberfil PP-15/T/10/20 Fiberfil Polypropylene Homopolymer (Talc Filler, 22%)

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow			ASTM D955
0.125 in		in/in
0.250 in		in/in
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® PP-15/T/10/20, Fiberfil PP15T1020, Fiberfil® , Fiberfil, FiberfilPP15T1020, PP, PP 15 T 10 20, PP-15/T/10/20, PP15T1020, PP-15:T:10:20, PP-15+T+10+20, PP-15-T-10-20, PP-15_T_10_20, PP-15 T 10 20, PP:15/T/10/20, PP/15/T/10/20, PP+15/T/10/20, PP_15/T/10/20, PP 15/T/10/20, PP15, 15T, T10, 1020, PP15_T_10_20, PP15 T 10 20, PP_15T1020, PP 15T1020, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PolypropyleneHomopolymer, PPHomopolymer, 15PP

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® PP-15/T/10/20