Fiberfil PP-60/TC/13 BL8860 Fiberfil Polypropylene Homopolymer (Talc Filler, 13%)

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow			ASTM D955
0.125 in		in/in
0.250 in		in/in
0.500 in		in/in
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® PP-60/TC/13 BL8860, Fiberfil PP60TC13 BL8860, Fiberfil® , Fiberfil, FiberfilPP60TC13BL8860, PP, PP 60 TC 13 BL 8860, PP-60/TC/13 BL8860, PP60TC13 BL8860, PP-60:TC:13 BL8860, PP-60+TC+13 BL8860, PP-60-TC-13 BL8860, PP-60_TC_13 BL8860, PP-60 TC 13 BL8860, PP:60/TC/13 BL8860, PP/60/TC/13 BL8860, PP+60/TC/13 BL8860, PP_60/TC/13 BL8860, PP 60/TC/13 BL8860, PP60, 60TC, TC13, 13BL, BL8860, PP60TC13BL8860, PP60_TC_13 BL8860, PP60 TC 13 BL8860, PP_60TC13 BL8860, PP 60TC13 BL8860, PP60_TC_13BL8860, PP_60TC13BL8860, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PolypropyleneHomopolymer, PPHomopolymer, 60PP

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® PP-60/TC/13 BL8860