Fiberfil PP-60/TC/20/FD Fiberfil Polypropylene Homopolymer (Talc Filler, 20%)

General
Material Status	Commercial: Active
Availability	North America
Filler / Reinforcement	Talc Filler, 20% Filler by Weight
Features	Homopolymer
Agency Ratings
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow			ASTM D955
0.125 in		in/in
0.250 in		in/in
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® PP-60/TC/20/FD, Fiberfil PP60TC20FD, Fiberfil® , Fiberfil, FiberfilPP60TC20FD, PP, PP 60 TC 20 FD, PP-60/TC/20/FD, PP60TC20FD, PP-60:TC:20:FD, PP-60+TC+20+FD, PP-60-TC-20-FD, PP-60_TC_20_FD, PP-60 TC 20 FD, PP:60/TC/20/FD, PP/60/TC/20/FD, PP+60/TC/20/FD, PP_60/TC/20/FD, PP 60/TC/20/FD, PP60, 60TC, TC20, 20FD, PP60_TC_20_FD, PP60 TC 20 FD, PP_60TC20FD, PP 60TC20FD, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PolypropyleneHomopolymer, PPHomopolymer, 60PP
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® PP-60/TC/20/FD

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by Fiberfil® Engineered Plastics Inc.