IDES Prospector Already have an account? Login Here

IDES

Ecomass® 4301TU74

Polyphthalamide

Tungsten Filler

Supplied by Ecomass Technologies

The technical datasheet with complete property values for Ecomass® 4301TU74 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Tungsten Filler
Features 
  • Good Toughness
  • Medium Rigidity
  • Non-Toxic
Uses 
  • Radiation Shielding
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Additional Information
Notched Izod Impact Strength, ISO 180, Notch A: 6 KJ/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ecomass® 4301TU74, Ecomass 4301TU74, Ecomass® , Ecomass, Ecomass4301TU74, 4301 TU 74, 4301TU74, 4301TU, TU74, Polyphthalamide, PPA, Polyamide, Nylon, TU4301
Features
Features may also be described by the following terms: Good Toughness, Tough, Medium Rigidity, Good Rigidity, Non-Toxic, Non Toxic, Toxicity None.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.