IDES Prospector Already have an account? Login Here

IDES

UNIVAL™ DMDG-6200 NT 7

High Density Polyethylene Resin

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for UNIVAL™ DMDG-6200 NT 7 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
UNIVAL™ DMDG-6200 NT 7 is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals, toiletries and cosmetics, health and medicinal aids, and food products. The product is specifically designed to provide excellent processing on all blow molding equipment including continuous extrusion machinery.

  • Excellent processability
  • High melt strength
  • Excellent balance of top load and ESCR
  • Complies with:
    • U.S. FDA 21 CFR 177.1520 (c) 3.2a.
    • Canadian HPFB No Objection (With Limitations)
    • EU, No 10/2011
    • Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Agency Ratings 
  •  1
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
     ASTM D790B
2% Secant
psi
  
Tangent
psi
  
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength 3
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature (DSC)
°F
 Internal Method
Peak Crystallization Temperature (DSC)
°F
 Internal Method
Additional Information
Plaque molded and tested in accordance with ASTM D 4976.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UNIVAL™ DMDG-6200 NT 7, UNIVAL DMDG6200 NT 7, UNIVAL™ , UNIVAL, UNIVALDMDG6200NT7, DMDG, DMDG-6200 NT 7, DMDG6200 NT 7, DMDG:6200 NT 7, DMDG/6200 NT 7, DMDG+6200 NT 7, DMDG_6200 NT 7, DMDG 6200 NT 7, DMDG6200, 6200NT, NT7, DMDG6200NT7, DMDG_6200NT7, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Dow, PolyethyleneHighDensity, 6200DMDG
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), HPFB (Canada) (1), FDA (1).
Notes
1With limitations
2Typical properties: these are not to be construed as specifications.
3Type S
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.