IDES Prospector Already have an account? Login Here

IDES

VERSIFY™ 2000

Plastomer

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for VERSIFY™ 2000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VERSIFY™ 2000 Plastomer is a resin with a low melt flow rate making it suitable for blown film, blow molding, extrusion and thermoforming. It is an excellent sealant and is particularly suitable for use in BOPE structures. It has excellent compatibility with PP and is useful agent to bring softness and temperature performance.

Main Characteristics
  • Pellet
  • Low Melt Flow Rate
  • Good sealant
  • Compatible with PP
  • Soft polypropylene

Applications
  • Blown Film
  • Sealant
  • BOPE
  • Extrusion Applications

Complies with:
  • U.S. FDA FCN 909
  • U.S. FDA 21 CFR 175.105(c)(5)
  • EU, No 10/2011
Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Total Crystallinity
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, Compression Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Compression Molded)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A, Compression Molded 4
 
  
Shore D, Compression Molded 5
 
  
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 Internal Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature (DSC)
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gardner Gloss
     ASTM D523
20°, 39.4 mil, Compression Molded
 
  
60°, 39.4 mil, Compression Molded
 
  
Haze (78.7 mil, Injection Molded)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VERSIFY™ 2000, VERSIFY 2000, VERSIFY™ , VERSIFY, VERSIFY2000, 2000, Plastomer, Polyolefin, Plastomer Polyolefin, POP, Thermoplastic Elastomer, TPE, Dow, PlastomerPolyolefin, ThermoplasticElastomer
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Aged two weeks (±3 days) prior to testing.
4Hardness after 10 seconds.
5Hardness afer 10 seconds.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.