NOVALAC RX®865M Vyncolit Phenolic (Glass Fiber Reinforcement)

Product Description

RX®865M is a fiberglass reinforced phenolic novalac compound, featuring dimensional stability, moderate impact resistance, and good strength and modulus.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement

Features

Acid Resistant

Base Resistant

Fungus Resistant

Good Creep Resistance

Good Dimensional Stability

Good Impact Resistance

High Strength

Low Smoke Emission

Solvent Resistant

Ultra High Toughness

Uses

Appliances

Automotive Applications

Connectors

Electrical/Electronic Applications

Gears

Housings

Membrane Touch Switches

Power/Other Tools

Pump Parts

Appearance

Black

Forms

Flakes

Processing Method

Compression Molding

Injection Molding

Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage - Flow		%	ISO 294-4
Water Absorption (73°F, 24 hr)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, Compression Molded)		psi	ISO 527-2
Flexural Modulus (Compression Molded)		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (E-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
CLTE			ASTM E831
Flow		in/in/°F
Transverse		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM C177
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength²		V/mil	ASTM D149
Arc Resistance		sec	ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0625 in
0.125 in
UL	Nominal Value	Unit	Test Method
RTI Str		°F	UL 746
RTI Imp		°F	UL 746
RTI Elec		°F	UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NOVALAC RX®865M, NOVALAC RX865M, NOVALAC , NOVALACRX865M, RX 865 M, RX®865M, RX865M, RX865, 865M, Phenolic, Vyncolit, 865RX
Features
Features may also be described by the following terms: Ultra High Toughness, High Strength, Low Smoke Emission, Good Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Power Tools, Tools, Membrane Touch Switches, Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Back Pressure		psi
Injection Notes
Plastication: 50rpm Injection Time: 2 to 8 sec Hold Time: 1 to 5 sec/mm Cure Time, 0.125 in: 5 to 12 sec/mm All ISO properties listed were tested in accordance with ISO 3167. All ASTM properties listed were tested in accordance with ASTM D5948. The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM F433. Dielectric Strength, ASTM D149, 60 Hz, Method A, dry: 13.5 kV/mm Powder Density, ISO 60: 0.65 g/cm³ HDT A (1.80 MPa) Unannealed, ISO 75A, Post Baked: >282°C Compressive Strength, ISO 604: 265 MPa

Notes

¹Typical properties: these are not to be construed as specifications.

²Method A (Short-Time)

NOVALAC RX®865M

Phenolic

Glass Fiber Reinforcement

Supplied by Vyncolit N.V.