IDES Prospector Already have an account? Login Here

IDES

Optema™ TC 220 ExCo

Ethylene Methyl Acrylate Copolymer Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Optema™ TC 220 ExCo is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Optema TC 220 is an ethylene methyl acrylate copolymer, which can be used for making alloys, blends and compounds or be injection molded where softness and flexibility are required. It is also an excellent grade for coextrusion coating and extrusion lamination where good interlayer adhesion between polyethylene, polypropylene, nylon, PVdC or other substrates is required.

Processing Conditions:
Excellent results are obtained in extrusion coating at 260°C to 300°C (500°F - 572°F) temperature range. Processing temperatures above 320°C (608°F) are not recommended.
Optema EMA can be processed on conventional extrusion equipment designed for extrusion coating LDPE. Their broad thermal stability range offer wide processing conditions window.
Water cooling of extruder throat is preferred to avoid hopper bridging.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Methyl Acrylate Content
wt%
 ExxonMobil Method
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Optema™ TC 220 ExCo, Optema TC 220 ExCo, Optema™ , Optema, OptemaTC220ExCo, TC 220 ExCo, TC220, 220ExCo, TC220ExCo, Ethylene Methyl Acrylate Copolymer, EMA, Thermoplastic Elastomer, TPE, ExxonMobil, EthyleneMethylAcrylateCopolymer, ThermoplasticElastomer, 220TC
Extrusion Notes
Excellent results are obtained in extrusion coating at 260°C to 300°C (500°F - 572°F) temperature range. Processing temperatures above 320°C (608°F) are not recommended.
Optema EMA can be processed on conventional extrusion equipment designed for extrusion coating LDPE. Their broad thermal stability range offer wide processing conditions window.
Water cooling of extruder throat is preferred to avoid hopper bridging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.